Tug Use - General Guidelines
Pilots will confirm the tug requirements with Harbour Control or PDO for
arriving vessels immediately after boarding and for departing vessels, one hour
before departure.
The master and the pilot will determine the positioning and securing
arrangements for the tugs during their information exchange prior to entry or
departure.
Where 3 tugs are specified below, if at least one tug is a Z peller then only
2 tugs will be required.
Individual Pilot requirements, weather conditions and vessel abnormalities
may necessitate more or less tugs.
Adequate Thrusters will count as one tug unless advised otherwise.
Melbourne
| LOA (metres) |
Arrival |
Departure |
| Head in |
Head out |
Head in |
Head out |
| 100 to 125 |
1 |
1 |
1 |
0 |
| 125 to 200 |
2 |
2 |
2 |
2 |
| 200 to 230 |
2 |
3 |
2 |
2 |
| Greater than 230 |
3* |
3* |
2 |
2 |
| There are several exceptions to these general rules and Masters
should check with their agents to obtain further
information |
Geelong
| LOA (metres) |
Arrival |
Departure |
| Head in |
Head out |
Head in |
Head out |
| 100 to 125 |
1 |
1 |
1 |
0 |
| 125 to 165 |
2 |
1 |
2 |
1 |
| 165 to 230 |
2 |
2 |
2 |
2 |
| Greater than 230 |
3* |
3* |
2 |
2 |
| There are several exceptions to these general rules and Masters
should check with their agents to obtain further
information |
Westernport
Tug numbers are determined by the pilot depending on the berth, weather
conditions and the berth.
Further information on the tugs in use can be obtained from http://www.portofmelbourne.com/shipping/services/towage.asp
|